電纜橋架廠家講解關于橋架安裝需要的4個材料!
電纜橋架安裝是需要一定的配件才可以,下面山東電纜橋架就給大家總結一下橋架安裝需要的4個材料!
The installation of cable tray needs certain accessories. The following four materials for the installation of cable tray in Shandong Province are summarized.
(1)橋架:分別統計出各種型號規格橋架的全長,除一該橋架的標準長度,得出橋架的數量外,再增加1%-2%的余量。
(1) Bridge frame: The total length of each type and specification of the bridge is calculated separately. In addition to the standard length of the bridge, the number of the bridge frame is obtained, and the remaining amount is increased by 1%-2%.
(2)立柱:如采用統一規格的立柱,可用橋架全長除以平均立柱間距,得出立柱數,再增加2%~4%余量。如立柱規格不一,則需分別統計。
(2) Columns: If the column of uniform specification is adopted, the total length of the bridge can be divided by the average spacing of the columns, and the number of columns can be obtained, and the remaining amount can be increased by 2%-4%. If column specifications are different, statistics should be made separately.
(3)托臂:橋架全長除以托臂平均間距,再增加1%~2%余量,極為總需量。
(3) Brackets: The total length of the bridge is divided by the average spacing of brackets, and the additional 1%-2% is needed.
(4)其它部件:按其主體數乘以一定比例(視總廠而定)求得其總數。
(4) Other parts: multiply the number of main parts by a certain proportion (depending on the factory) to get the total number.
本文由山東電纜橋架的小編進行整理編寫,如果大家想要了解更多的產品及更詳細的精彩內容,請關注我們的網站:http://,您的惠顧是對我們很大的支持。
This article is compiled by the small edition of Shandong Cable Bridge Frame. If you want to know more products and more detailed wonderful content, please pay attention to our official website: http://. Your patronage is a great support for us.