安裝不銹鋼配電箱的必備條件
Now the market demand for stainless steel distribution box is more and more big, but the stainless steel distribution box, its use requirements are more stringent, Ji'nan Feng Feng Industrial Co., Ltd. for everyone to do a brief introduction:
1、輸送和存儲當中的熱度可在-25攝氏度—+55攝氏度之間,在不超過24小時內可達到+70攝氏度超過24h。
1, transport and storage of heat can be between -25 degrees Celsius - +55 degrees Celsius, in less than 24 hours can reach +70 degrees Celsius, more than 24h.
2、周圍的環境溫度要在-5攝氏度—+40攝氏度,而且它的24小時平均數不能超過+35攝氏度;
2, the ambient temperature should be at -5 degrees Celsius - +40 degrees Celsius, and its 24 hours average can not exceed +35 degrees celsius;
3、環境對應的濕度在高熱度為+40攝氏度時不能超過50%;在稍低溫度下能夠有稍高的對應濕度,潮月的月平均低濕度不出+25攝氏度,這個月的月平均高對應濕度不超過90%,還要考慮因熱度的變化發生在配電箱表面的凝露;它的污染等級三。
3, the corresponding environmental humidity in the highest heat to +40 degrees Celsius can not exceed 50%; to have the corresponding higher humidity at a slightly lower temperature, the tidal monthly average minimum humidity not +25 degrees Celsius, the monthly average maximum corresponding humidity of not more than 90%, but also consider the change of heat for in distribution box surface condensation; its pollution level three.
4、它的安裝地點高度不能超過2000米;
4, its installation site height can not exceed 2000 meters;
您的需求就是我們努力的方向,您的追求就是我們的追求,歡迎您的到來,我們一起進步,一起創新!
Your demand is the direction of our efforts, your pursuit is our pursuit, welcome your arrival, we progress together, with innovation!